About:

This article covers how to re-connect Adapters to Network.

Tools Required:

• TH1 Module

• Wi-Fi Adapter

Steps:

1. To connect Adapters to the Network, you must press the white identify button, located above the Power-Brick Plug-In Point and the Power Switch. 

   Scenario 1: The Green LED Light does not Appear

   If the Green LED does not come on, try pressing the black button on and off again. Repeat at least two times. 

   Scenario 2: The Green LED Light does not Repeatedly Appear 

   If the Green LED still does not come on after multiple attempts, the factory stored configuration within the adapter has been lost. Please contact Purkay Labs for assistance.